Shandong ReeWo hydraulic technology co.Ltd.
R6K motor
You can flexibly select different mounting flanges, output shafts, displacements, and more, providing customers with a wider range of options.
Keywords:
Category:
R6K Series Motor
Structural features
This series of motors features heavy-duty tapered roller bearings, enabling the output shaft to withstand greater radial torque.
Adopt high-pressure-resistant shaft seals.
You can flexibly select different mounting flanges, output shafts, displacements, and more, providing customers with a wider range of options.
The motor’s rotation direction and speed can be flexibly and smoothly controlled.
For the heavy-duty motor series, this motor model offers exceptional cost-effectiveness.
Performance parameters
Discontinuous pressure refers to the pressure that the motor’s oil inlet is allowed to withstand, while continuous pressure refers to the pressure difference when the two oil ports are operating continuously.
The motor is not permitted to operate simultaneously under conditions of high speed and high pressure.
Intermittent operating conditions—refers to a motor operating under these conditions for no more than 10% of each minute.
Recommended hydraulic oil: viscosity of 37–73 cSt, filtration accuracy: ISO 18/13, and maximum system temperature not exceeding 80℃.
The shaft seal can withstand a back pressure of 10 MPa. It is recommended that the motor’s back pressure not exceed 5 MPa; if the back pressure exceeds 5 MPa, it is advisable to connect an external oil drain line. Before and during operation, the motor’s cavity must always be kept fully filled with hydraulic oil to ensure proper lubrication and cooling of the motor.
It is strongly recommended that the motor run at 30% load for about one hour before operating at full load, allowing the motor to undergo sufficient break-in.
Application Cases
Product Center